AutoCad 2007 Test

AutoCad 2007 Test

Which of the following type of objects, is not supported by Associative Dimensions?

a.    Hatches

b.    Multiline objects

c.    Objects with nonzero thickness

d.   All of the above

When is the lock icon displayed in the lower corner of the tool palette?

a.   When a tool palette file is set with a read-only attribute

b.   When a tool palette file is set for publishing

c.    When a tool palette file is set for publish lo web

d.   All of the above

Which option will you choose to open the markup set manager?

a.    Click Modify > Markup Set Manager

b.    Click Insert > Markup Set Manager

c.    Click Tools menu > Palettes > Markup Set Manager

d.   All of the above

This question is based upon the figure shown below

What will occur when you close the balloon message without reloading as shown in the picture?

a.    It reloads all changed Xrefs

b.   An exclamation point is added to the Xref icon

c.    Nothing will happen

d.    None of the above

Which option will you select to attach drawing references (Xrefs)?

a.    Use External references command

b.    Use Xattach

c.    Use DesignCenter

d.   All of the above

This question is based upon the figure shown below

Which of the following tab you will choose to prevent signature status from being displayed for valid signatures, as shown in the picture?

a. A

b. B

c. C

d. D

Which of the following properties is not included within the Reference Manager?

a.    Host drawing

b.    Host version

c.    Host size

d.    Found path

When does a temporary history entry state occur?

a.   When you specify an output location and file name for rendering

b.   When you render an image only lo the Render Window without specifying an output file

c.    Both a and b

d.    None of the above

Which AutoSnap tool is not turned on by default

a.    Marker

b.   Tooltip

c.    Aperture box

d.    Magnet

Which of the following is not a type of action override?

a.    Distance multiplier

b.    Block action

c.    Angle offset

d.   All of the above

Which type of light emits uniform parallel light rays in one direction only in AuloCAD2007?

a.    Point Light

b.    Spotlight

c.    Distant Lights

d.   All of the above

State whether True or False

Tool palette files have an.xtp file extension

a.   True

b.   False

This question is based upon the figure shown below

Which of the given options displays the layer properties manager in the given picture?

a.   A

b.    B

c.    Both a and b

d.    None of the above

This question is based upon the figure shown below

State True or False

As shown in the picture, the symbol for projected tolerance is preceded by a height value, which specifies the minimum projected tolerance zone

a.   True

b.   False

This question is based upon the figure shown below

What does b stand for in the given example when you turn the automatic save option on as shown in the given picture?

a.    b is the number of open instances of the same drawing file in the same work session

b.    b is the number of open instances of the same drawing in different work sessions

c.    b is a random number

d.    None of the above

Which of the following elements in the Block editor cannot be deleted, added, and modified?

a.    Lookup tables

b.    Grips

c.    Visibility states

d.    None of the above

State whether True or False

Dimensional input is available for ARC, CIRCLE, ELLIPSE, LINE, and PLINE

a.   True

b.   False

Which of the following windows cannot be docked, anchored, or floated?

a.    Properties palette

b.   Tool palette

c.    DesignCenter

d.    None of the above

Which switch suppresses the display of the Sheet Set Manager window on startup?

a.   /set

b.   /nossrn

c.    /pi

d.   /Id

Which option is not available in AutoCAD2007 to repair a damaged drawing file?

a.    Recover

b.    Audit

c.    Check

d.    None of the above

Which among the following is not a state of section objects?

a.    Section Plane

b.    Section Size

c.    Section Boundary

d.    Section Volume

Which of the following types of files can be used as maps?

a.   TGA

b.    PCX

c.    PNG

d.   All of the above

Which of the following objects cannot be extruded?

a.    Planar surfaces

b.    Planar faces on solids

c.    Polylines that have crossing

d.   Traces

Which keyboard shortcut will you select to toggle polar tracking?

a.    F11

b.    F10

c.    F9

d.    F8

This question is based upon the figure shown below

Which type of hatching style is shown in the given picture?

a.    Normal

b.    Outer

c.    Ignore

d.    None of the above

This question is based upon the figure shown below

Which command is used on picture A to create a mesh or to acheive the result of picture El?

a.   TABSURF

b.    REVSURF

c.    RULESURF

d.    EDGESURF

Which referencing method uses the customization group and element ID?

a.   Absolute

b.    Relative

c.    Both a and b

d.    None of the above

State whether True or False

The default value for Maxhatch is 10000.

a.   True

b.   False

Which method of Handshaking uses additional wires in the cable between the plotter and computer?

a.    Hardware handshaking

b.    Software handshaking

c.    Both a and b

d.    None of the above

State whether True or False

You cannot use CONVTOSOLID with polylines that contain vertices with 0 width

a.   True

b.   False

Which option you will choose to show or hide light glyphs?

a.    Click Tools menu > Palettes > Tool Palettes

b.    Click Tools menu > Palettes > Dashboard

c.    Click Tools menu > Palettes > Properties

d.    Click View menu > Render > Light > Light List

This question is based upon the figure shown below

Which option in the given picture displays parallel projection?

a.    A

b.    B

c.    Both a and b

d.    None of the above

Which of the following is the default mode state for shadows?

a.    Soiled

b.    Simple

c.    Segment

d.    None of the above

Which of the following is not a type of mapping?

a.    Planar Mapping

b.    Face Mapping

c.    Spherical Mapping

d.    Cylindrical Mapping

State whether True or False

Layer 0 can be deleted or renamed

a.   True

b.   False

You can change a markup's status to which of the given options?

a.    Question

b.    For Review

c.    Closed

d.   All of the above

Which of the given editing commands are not available for OLE objects?

a.    Break

b.    Chamfer

c.    Fillet

d.    All of the above

Which of the following layer properties is not checked by the layer plug-in?

a.    Plot style mode

b.    Freeze/Thaw

c.    Lineweight

d.    Linetype

State True or False

Mesh components are comprised of vertices, faces, polygons, and edges

a.   True

b.   False

Which among the following types of coordinates displays update as you move the cursor?

a.    Static display

b.    Distance and angle display

c.    Dynamic display

d.   All of the above